implant, Screwed Teeth, Porcelain Veneers,
Zirconia Teeth, Gum Treatment, Istanbul Dental Hospital

implant

The developing technology has started to produce much more functional and aesthetic solutions for dental loss than before. Until recently, the adjacent dentals were cut and bridges were made in dental loss. This solution was both far from being aesthetic, and more importantly, a form of treatment affecting the long term health of the adjacent teeth. And, in more dental losses, the patients had to use removable (moving) dentures. Thanks to the implant treatment, the dental losses are treated just like a new dental erupting in mouth. implant can be applied to almost everyone who do not have very serious health problems.

Read More

In what circumstances is the implant applied?

implant

The implants can be applied in cases when the corrosion of the two healthy dentals on either side of the cavity for the construction of denture (bridge) is not desired in single dental losses; in cases when the treatment of the cavities arising from the dental losses at the rearmost of the jaws with a moving denture (removable palate) is not desired; and in completely toothless jaws, when the bone thoroughly becomes indistinct, and the making and use of a moving denture (removable palate) is impossible, if the general state of health of our patients allows implant surgery and if there is an amount of bones in jaws sufficient for the placement of implant. implant can be applied to everyone the general state of health of whom allows for implant surgery, the oral health and maintenance of whom is in good condition, who is not allergic to the material used, and where there is physical infrastructure in jaws sufficient for the placement of implant, or can be provided.

Read More

What is the Reliability and Success of implant?

implant

The titanium element used in the production of implants is a metal not reacting with the tissue, and of good compatibility. The implants used in traumatology and orthopedics for many years, have been successfully used in dentistry since the 1970s. It is possible to increase the success rate up to 95% with proper planning, precise surgical technique, perfect sterilization, meticulous prosthetic superstructure, and a good care.

What Kinds of Advantages of implant Application are Present?
In single dental losses, sometimes a corrosion of a certain amount also in the two intact dentals on either side of the cavity is required in order to construct a denture (bridge). However, when the loss is covered with implant, the corrosion of the adjacent dentals is not necessary

Read More

How is the implant Application Done?

implant

The general health and the status of dentals of our patient is examined in the initial inspevtion. After the necessary examinations and investigations, the planning is made. If the conditions are suitable for implant application, the surgical stage is reached. When our patient comes to his second appointment, the implant surgery is applied under local anesthesia. After the implant is placed in the jawbone, it is waited for 3-6 months for the occurance of its fusion with bone (osseointegration).

When fusion with bone is attained, the outer surface of implant is removed and a metal header is attached for the formation of gums. After waiting for 1-2 weeks, the routine prosthetic phases are started. And, this period lasts approximately 7-10 days.

The treatment durations and stages stated above may vary depending on the complications.

Read More

implant

The screws placed in place of the lost teeth with the aim of treatment are called implants. The main objective of dentistry is to replace the lost teeth as functioally and aesthetically similar to natural teeth. The implants are placed into the jawbone by a simple surgical procedure under local anesthesia.

Porcelain Veneers

One of the oldest methods used to eliminate the tooth losses is to make use of veneers. Although the use of implants has become widespread in current standards, the porcelain veneers also have advantages in some cases. Until recently, Biodental veneers were made, which are a kind of plastic over a metal infrastructure.

Contact

Capa Orthodontics
Tel: (0212) 587 24 24 - 529 03 00
Sehremini Mahallesi, Deniz Abdal Cami Sk. 23/A Capa-Fatih, Istanbul
info@capaortodonti.com